Skip to Content
Project Case Study

Low Voltage Switchgear Package for Commercial Building Distribution System

A low voltage switchgear and indoor transformer package supplied for a commercial building project in the United Arab Emirates, including MDB panels, feeder coordination, consultant documentation, testing records and shipment support.

United Arab Emirates 2025 Dry Type Transformer Commercial Building
Get A Similar Quote Chat With Hank
Low Voltage Switchgear Package for Commercial Building Distribution System
Project Overview

Project Snapshot

A low voltage switchgear and indoor transformer package supplied for a commercial building project in the United Arab Emirates, including MDB panels, feeder coordination, consultant documentation, testing records and shipment support.

This project involved the supply of low voltage switchgear and indoor transformer equipment for a commercial building power distribution system in the United Arab Emirates. The supplied scope supported main incoming distribution, outgoing floor feeders, auxiliary loads and building electrical room installation.

Before production, the consultant specification, panel schedule and single-line diagram were reviewed to confirm main busbar rating, short-circuit withstand level, incoming protection, outgoing feeder layout, metering requirements, form of separation and cable entry arrangement.

The panels and transformer equipment were manufactured and tested with the required technical documents, drawings and inspection records before shipment.

At A Glance
Location
United Arab Emirates
Project Year
2025
Product
Dry Type Transformer
Industry
Commercial Building
Project Type
EPC Project
Standards
IEC, Consultant specification, Project specification
Request Details

Want The Full Spec Package For This Project?

Send us your single line diagram and ratings. You get a matched proposal, drawings, and a delivery plan within 24 hours.

Get Project Quote Chat With Hank
Scope Of Supply

Equipment Supplied

Every unit delivered for this project, with quantity and configuration notes.

Low Voltage Switchgear

Main distribution boards for commercial building electrical rooms

Quantity: 1 lot

Including incoming ACB panels, outgoing feeder panels, metering, busbar system and auxiliary control wiring.

Dry Type Transformer

Indoor dry type transformer for building power distribution

Quantity: 2 units

Supplied with indoor enclosure, temperature monitoring and project documentation.

Low Voltage Switchgear

Capacitor and auxiliary distribution panels

Quantity: 1 lot

Configured according to the building electrical load schedule and consultant requirements.

Match Your Scope

Need The Same Equipment For Your Site?

Tell us your voltage, capacity, and quantity. We confirm configuration, accessories, and lead time for your order.

Get Project Quote Chat With Hank
Technical Data

Key Ratings

Voltage, capacity, and protection parameters confirmed for this project.

Technical ratings for this project
Parameter Value Notes
Transformer Capacity 1600 kVA Per transformer
Primary Voltage 11 kV Medium voltage side
Secondary Voltage 0.415 kV Low voltage side
Frequency 50 Hz According to project requirement
Transformer Type Cast resin dry type Indoor commercial building installation
LV Switchgear Rated Voltage 415 V Building low voltage system
Main Busbar Rating 4000 A Main distribution board rating
Short-circuit Current 50 kA / 1s According to consultant specification
Form of Separation Form 4b Confirmed during approval stage
Incoming Protection ACB With metering and protection accessories
Metering Multifunction meters Prepared according to panel schedule
Enclosure Protection IP42 Indoor electrical room installation
Cable Entry Top and bottom entry Confirmed according to site layout
Verify Ratings

Building To These Exact Ratings?

Share your project specification and we map every parameter, vector group, and impedance to your requirement before production.

Get Project Quote Chat With Hank
How We Delivered

Challenge And Solution

The requirement on site, and how the specification, drawings, and production were supported.

The Challenge

Project Requirement

<p>The commercial building project required switchgear panels to match the consultant specification, panel schedule and limited electrical room layout. The main concerns included main busbar rating, short-circuit level, form of separation, metering arrangement, outgoing feeder identification, cable entry direction, installation clearance and approval document submission.</p>

Our Solution

What We Supported

Our engineering team reviewed the consultant specification, SLD, panel schedule and electrical room layout before preparing the switchgear proposal. The MDB arrangement, busbar rating, incoming protection, outgoing feeder schedule, metering configuration, dry type transformer scope and cable entry direction were checked before production.

We prepared a coordinated technical document package with datasheets, arrangement drawings, wiring references, compliance statement, FAT procedure and test reports to support consultant review and site installation.

Talk To Engineering

Have A Tricky Approval Or Site Condition?

Our engineers review your drawings, deviations, and standards so your equipment clears consultant and utility approval the first time.

Get Project Quote Chat With Hank
Quality And Records

Testing And Documents

Inspection items and engineering documents prepared for this project.

Testing And Inspection

Routine Test FAT Test Report Provided Pre-shipment Inspection Mechanical Operation Check Secondary Circuit Check Power Frequency Withstand Voltage Test

<p>Factory inspection covered panel dimensions, busbar arrangement, protection device installation, mechanical operation, interlock checks, secondary wiring, insulation resistance and power frequency withstand voltage. Dry type transformer routine tests and temperature controller checks were completed before shipment.</p>

Engineering Documents

Technical Proposal Product Datasheet General Arrangement Drawing Foundation Drawing Single-line Diagram Review Transformer Outline Drawing Switchgear Panel Arrangement Primary Schematic Secondary Schematic Control Wiring Diagram Terminal Plan Panel Schedule BOM / Component List CT / PT List Relay and Meter List Compliance Statement Technical Deviation Sheet FAT Procedure Test Report Installation Manual Operation & Maintenance Manual
Quality On Record

Want Test Reports And FAT For Your Order?

We arrange routine tests, witness inspection, and full document sets so your equipment ships with proof of compliance.

Get Project Quote Chat With Hank
See Your Build

Want Photos Of Your Units In Production?

You get progress photos at production, testing, and packing stages so you track your order from factory to container.

Get Project Quote Chat With Hank
Export And Delivery

Packing And Shipment

Export packing, container loading, and nameplate records for this shipment.

Dry type and oil immersed transformer solutions for commercial buildings, malls, offices, and mixed-use developments
Transformers for commercial building power distribution, indoor substations, and mechanical loads.
Dry type and oil immersed transformer solutions for data center power distribution and UPS systems
Transformers for data center power distribution, UPS systems, mechanical loads, and electrical rooms.
Ship With Confidence

Ready To Move Your Project Forward?

Send your destination port and timeline. We handle export packing, loading, and documents so your equipment arrives ready to install.

Get Project Quote Chat With Hank